Blog

Relaunch 2020

13-37.org electronics wird zu leetronics UG (haftungsbeschränkt) Ab dem 30.12.2019 ist der Shop aufgrund interner Reorganisation geschlossen. Neueröffnung im März 2020 unter der neuen Firma: “leetronics UG (haftungsbeschränkt)” Wenn Sie an einem unserer früheren Produkte interessiert sind, bitte haben Sie etwas Geduld. Oder schauen Sie doch mal auf den Seiten der jeweiligen Hersteller/Produkte: SoloKeys FIDO2 […]

Weiterlesen

Now live: free Entropy Service at rng.13-37.org

A free entropy service utilizing the Infinite Noise TRNG is now live on https://rng.13-37.org ! Using this service, anyone can explore, test and use the Infinite Noise TRNG for free – without having to buy the actual hardware. You can register using the form on rng.13-37.org/register – or this iframe. No personal data required. You’ll receive […]

Weiterlesen

ESP8266 + nRF2401 MiLight Gateway “Sandwich”

Vor einiger Zeit habe ich mir ein paar MiLight RGB LED Lampen zugelegt, um sie mit einem Raspberry Pi und dem openmilight Code zu verwenden. Leider hat das nicht so gut funktioniert, daher habe ich nach besseren Lösungen gesucht – und gefunden: http://blog.christophermullins.com/2017/02/11/milight-wifi-gateway-emulator-on-an-esp8266/ Als Ergänzung zu dieser erstklassigen Software-Lösung für das ESP8266 habe ich eine […]

Weiterlesen

MIDI Biodata Sonification Device – Settings menu for the MIDI Sprout

The MIDI Biodata sonification device (also known as MIDI Sprout, by DataGarden) is a great device to make music using plants.

Here I describe how to apply the firmware of the very similar Biodata Sonification Arduino shield to a “classic” MIDI Sprout. This includes adding a button to gain access to a settings menu which allows to adjust MIDI-Channel, LED brightness, note scale and finally the good old threshold.

Sam Cusumano, creator of the MIDI Sprout gave me the idea (or challenge?) to do this:

“And if you REALLY wanna get funky, you can add a button to A1/gnd and use my new codebase which allows users to edit MIDI channel, scale, led  brightness, threshold through a ‘menu system’ using the leds and the knob. check it out on my github https://github.com/electricityforprogress/BiodataSonificationBreadboardKit which is an ‘arduino shield’ but should work with the main biodata board with perhaps a few code tweaks.”

Weiterlesen

GNU/Linux Pakete für den Infinite Noise TRNG

Der “Infinite Noise TRNG” ist ein Open-Source Random Number Generator (Zufallszahlengenerator). Im offiziellen GitHub repository von Bill Cox (waywardgeek) gibt es eine sehr ausführliche Dokumentation zum Hardware-Design als auch den gesamten Quellcode. (public domain/CC0 Lizenz)

Hier gibts Pakete und signierte Paketquellen sind für Ubuntu/Debian, CentOS 7 und Raspbian (ARMv7) verfügbar – siehe unten.

Weiterlesen

Improved firmware for ESP8266 LED Dimmer

Last year, I built two units of the ESP8266 WiFi LED Dimmer Hackaday project by Tom Clement. Ordered the PCB’s for the project from ALLPCB and unexpectedly received 22 boards. Thats why I started to sell some of them on Tindie! The original project was very minimalistic when it comes to both hard- and software design. […]

Weiterlesen

Diese Webseite verwendet Cookies. Wenn Sie auf "OK" klicken, erklären Sie sich damit einverstanden. Mehr Informationen dazu finden Sie in den Datenschutzbestimmungen

Die Cookie-Einstellungen auf dieser Website sind auf "Cookies zulassen" eingestellt, um das beste Surferlebnis zu ermöglichen. Wenn du diese Website ohne Änderung der Cookie-Einstellungen verwendest oder auf "Akzeptieren" klickst, erklärst du sich damit einverstanden.

Schließen